减速机工厂-圣霖国际(在线咨询)-减速机

降低减速机运转时的齿轮传动噪声已成为行业内的重要研究课题，减速机哪家好，国内外不少学者都把齿轮传动中轮齿啮合刚度的变化看成是齿轮动载、振动和噪声的主要因素。用修形的方法，使其动载荷及速度波动减至小，以达到降低噪声的目的。这种方法在实践中证明是一种较有效的方法。

Reducing the gear tran*ission noise of the reducer has become research topic in the industry. Many scholars both at home and abroad regard the change of gear tooth meshing stiffness as the main factor of gear dynamic load，减速机生产厂家， vibration and noise. The method of modification is used to minimize the dynamic load and speed fluctuation in order to reduce noise. Thi*ethod is proved to be a more effective method in practice.

减速机内部齿轮齿形修整（修缘和修根）和齿顶倒角 将齿顶的齿形切削成比正确的渐开曲线略呈凸形。当齿轮齿面受外力产生变形时，减速机，可以避免对与之啮合的齿轮产生干涉，并且可以降低噪音，延长齿轮寿命。

The internal gear of the reducer is trimmed (trim and trim) and tooth top chamfering to make the tooth shape of the tooth top convex than the correct involute curve. When the gear tooth surface is deformed by external force， it can avoid interference to the gears engaged with it， and can reduce noise and prolong the service life of gears.

在运转200~300小时后，应进行换油，在以后的使用中应定期检查油的质量，对于混入杂质或变质的油须及时更换。一般情况下，对于长期连续工作的减速机，按运行5000小时或每年一次更换新油.

After running for 200~300 hours， the first oil change should be done. The quality of the oil should be checked regularly in later use， and the oil mixed with impurities or deterioration must be changed in time. In general， for a long-term continuous working reducer， new oil is replaced at 5000 hours or once a year.